All types of beams
The Explor is a machine that has worked in extreme terrain and plant conditions. Its imposing structure is a guarantee of solidity and durability.
In addition, by using the weight carriers you can make the machine even heavier.Heavy duty disc gangs
The disc gangs are designed to deal with stones, holes and plants.
Square shaped and between 50 and 60 mm wide, the shafts drive all the discs at the same time.Machined bearings
The bearings are machined in a steel block. They range from 50 mm to 60 mm and have a double tapered bearing and 6 seals. This guarantees a long service life in despite rough conditions.
The optional bearing covers further extend service life.On-board spanner
If you need to change your discs, you’ll find the spanner on the machine. As it is a 91 mm wide hexagonal nut, we chose to fit it on the chassis.
Thanks to its extra long length, you can use more tightening power. You don’t waste time, you get back to work quickly.Suspended axle
To improve comfort in the cab and on the road, we have added nitrogen cylinders.
These provide suspension to the wheel axle and limit tractor coupling load.
This increases the life of your equipment.Depth control is possible by wheels
The working depth can be adjusted via the angle of the disc tracks. In this case, you do two things in one go.
On the other hand, if you want to control the aggressivity of your discs while working superficially, you can adjust the depth thanks to the stop on the axle adjustable cylinder.